Ford Shelby GT500 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Hi all,

I want to put in the FR3-SVT suspension as well as a watt link.
I there a watt link that goes with the FRPP suspension kit?

Any help is sure appreciated.

Greetings from Hambhurg / Germany

Ulf
 

·
Registered
Joined
·
191 Posts
Hi Ulf,

I have heard some good feedback from guys who have gone with the Steeda one, I added a link below. I have no firsthand experience but there are some guys on here who have them also. That will be my next step if I am not happy with the geometry after the FRPP lowering kit.

http://www.steeda.com/products/steeda_watts_link_s197.php

Rob
 

·
Registered
Joined
·
658 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #5
THX all for the answers.
Steeda says: Note: Not compatible with convertibles, Eibach rear swaybar or Ford Racing rear swaybar.
With the FR3-SVT kit I believe I get the Ford racing rear swaybar, so this won`t work, right?
But does the fays2 work with the ford stuff??

Ulf / Germany
 

·
Registered
Joined
·
85 Posts
Add me to the list of happy Watts link GT500 guys. The Fays2 WL was the first suspension mod I did. It made a big difference in the manners of the rear end, and lowering the rear roll center by installing the WL with NO other changes felt as though I had put a stiffer set of sway bars on the car. I have since added Steeda LCA and UCA and GT500 rear sway bar with no fitment problems or interference of any kind.
 
1 - 6 of 6 Posts
Top