[gww52]

I'm looking for the part number for the wing mounting domed nuts.
Just went to my dealer and they tried to sell me a $5170.00 "kit".
They have a new parts person that couldn't be bothered.
I ended up tearing the washer off of one trying to remove it from the wing.
Thanks, Guy

 

[AZ21GT500]

I'm looking for the part number for the wing mounting domed nuts.
Just went to my dealer and they tried to sell me a $5170.00 "kit".
They have a new parts person that couldn't be bothered.
I ended up tearing the washer off of one trying to remove it from the wing.
Thanks, Guy

This thread had some information about antitheft hardware you might find useful if you need to replace one nut.

2020+ - Anti Theft for CFTP Rear Wing

Has anyone done any anti theft hardware for their carbon wing? I replaced the allen bolt and 8mm nut with a security nut and torx security bolt. I know someone with a cut off wheel can cut the supports and be gone in seconds, but maybe this would slow others down In reality, I suppose it’s a...

www.fordgt500.com

 

['cause]

.

 

[gww52]

I'd like to get the OE part if possible but we'll see.
I have 6mm nuts if I can't. It's for my 21 CFTP.
The 13 is just first on my vehicle list.

 

[AZ21GT500]

I'd like to get the OE part if possible but we'll see.
I have 6mm nuts if I can't.

I can't find any part numbers for them so it's possible they are not sold by ford as OEM. I reached out to my parts guy to ask him.

 

['cause]

.

 

[Goose17]

I'd like to get the OE part if possible but we'll see.
I have 6mm nuts if I can't. It's for my 21 CFTP.
The 13 is just first on my vehicle list.

Depending on the device used to view the forum, your vehicle year(s) under your screen name might be obscured. You have too much info there, which works much better to have in your signature (bottom of your posts). This causes confusion… as on quick glance, it looks like you are asking about wing hardware for your 2013. This is what I see on my iPad.

Please click your upper right avatar/account settings/vehicle details and enter your car year. It then shows under your screen name, which helps in conversations here. We cover multiple years of the GT500 on this forum. Be sure to click SAVE at the bottom!

 

[gww52]

I deleted the 2013 and saved it.

 

[gww52]

Looks good now.

 

[AZ21GT500]

Looks good now.

If you go through this post below it will give you the best way to create a signature where you can add multiple vehicles and even a photo.

All - New Members Guide to Navigating the Forum with...

Hi all I wanted to help our newest members navigate the forum just a little easier. Below each Photo will be an explanation of the different sections. These are mobile phone pictures so desktop viewing will be expanded. Clicking this NEW button will give you a list of all the threads you...

www.fordgt500.com

 

[gww52]

I have an FFP hood vent and I need a picture of the captured nut that's used on the rain tray.
It seems that the mounting holes are far oversized and I'm trying to work out a solution.
Charles gets me again!

 

[AZ21GT500]

I have an FFP hood vent and I need a picture of the captured nut that's used on the rain tray.
It seems that the mounting holes are far oversized and I'm trying to work out a solution.
Charles gets me again!

If you are talking about securing the rain tray to the hood, these fasteners will work. I’m using them on mine.

uxcell M5 x 16mm Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type 8 Pcs https://a.co/d/cp2tIYH

 

[Goose17]

Skip to 5:38 here:

 

[Trevorr]

Skip to 5:38 here:

Yesterday washed the car and realized my CF vent doesn't have the inserts to bolt the rain tray! I have the fastner screws, are you able to link the inserts? I see them in video but I can't find them online.

 

[MOT26]

Yesterday washed the car and realized my CF vent doesn't have the inserts to bolt the rain tray! I have the fastner screws, are you able to link the inserts? I see them in video but I can't find them online.

Use this link...https://www.acehardware.com/departments/automotive-rv-and-marine/automotive-accessories/license-plate-holders/81366
If I link the site it does not work. Copy and paste.
If you want black. To me black is kinda hard to find. White ones are everywhere.

 

[QSK50]

Custom Accessories Black/Silver Metal/Nylon License Plate Fasteners - Ace Hardware

If you want black. To me black is kinda hard to find. White ones are everywhere.

John, check your link. It’s not directing to the product.

 

[MOT26]

John, check your link. It’s not directing to the product.

Site will not link. Copy and paste will work.

 

[QSK50]

Are these the ones you recommend?

Custom Accessories Black/Silver Metal/Nylon License Plate Fasteners - Ace Hardware

License plate hardware from custom accessories provides a mounting solution for your license plates. This set includes 4 screws as well as 4 nylon inserts to mount your plate and frame to your vehicle.Find the FASTENER LICNS BLK SET/4 at Ace.

www.acehardware.com

 

[MOT26]

Are these the ones you recommend?

Custom Accessories Black/Silver Metal/Nylon License Plate Fasteners - Ace Hardware

License plate hardware from custom accessories provides a mounting solution for your license plates. This set includes 4 screws as well as 4 nylon inserts to mount your plate and frame to your vehicle.Find the FASTENER LICNS BLK SET/4 at Ace.

www.acehardware.com

The link that you posted will not work. Those are the ones though.

 

[AZ21GT500]

Are these the ones you recommend?

Custom Accessories Black/Silver Metal/Nylon License Plate Fasteners - Ace Hardware

License plate hardware from custom accessories provides a mounting solution for your license plates. This set includes 4 screws as well as 4 nylon inserts to mount your plate and frame to your vehicle.Find the FASTENER LICNS BLK SET/4 at Ace.

www.acehardware.com

The link that you posted will not work. Those are the ones though.

It’s something in the ACE algorithm that choses a location based on your IP.

The part number is 81366