Ford Shelby GT500 Forum banner

1 - 10 of 10 Posts

·
Premium Member
Joined
·
420 Posts
Discussion Starter #1 (Edited)
We just got our first batch of lower grille bezels in.

We posted up some info a few weeks back, but here's what they're about:
This is a very simple mod and looks great.
The bezels are made from solid billet aluminum. They have a nice lip and smooth radius on the inside and outside edges. We made the outer lip a little wider to stand out more.
They will be offered in clear anodized, black anodized and full polished.

Simple install.
This can be done with the bumper still on the car or when it’s removed.
You will need a 2 ¼” hole saw.
Remove the lower splash shield and drill from the back side out. No need to remove the grille. Some hole saws have a hex shaft, this helps greatly as now you can use a ¼” drive air ratchet with a socket to “drill” through the grille. This allows you more room to work. See pictures below:

This can be done on both sides, but a drill will fit on the passanger side.
After this is done you simply snap the inserts in from the front. They have a raised edge that will grab the back side of the grille and not come out. (Without prying from a screwdriver) See pic below.

These JLT bezels will be the start of our “JLT True cold air kit” for the GT500.
We are incorporating the bezels and duct work to bring cool outside air to the filter on your JLT CAI, hence making it a “True cold air” kit.

We have been running this on our GT500 for 4 months now and love it.

You can also use these to finish off your FRPP brake duct kit as well.

Some have asked about a screen.
We don't have a screen. FRPP doesn't use a screen on their brake kit and in 20+ years of driving I've never seen this area of any car all beat up from debris.
If you wanted a screen for piece of mind, that would be simple. Wrap a small square around the tube in the bumper before you clamp your brake or cooling hose onto it. Done.

Also, weather proof foam plugs coming soon!Anyway, let's get to the good stuff

We have them in anodized black for the stealth look, clear anodized for the billet aluminum look and polished coming soon.

PRICING:
BLACK AND CLEAR $69 shipped per pair
POLISHED $89 shipped per pair
JLT BEZEL PAGE
Thanks
Jay
 

Attachments

·
Registered
Joined
·
2,466 Posts
 

·
Registered
Joined
·
869 Posts
Ok,,,now Engineer Us Something To Mount A Front License Plate So We Do Not Have To Drill Holes In The Front Bumper
 

·
Registered
Joined
·
69 Posts
Already received...thanks (again) for the fast efficient handling Jay.
 

·
Registered
Joined
·
693 Posts
Well, post some pictures you guys! :stickpoke:
 
1 - 10 of 10 Posts
Top