Ford Shelby GT500 Forum banner

1 - 20 of 30 Posts

·
Supporting Vendor
Joined
·
531 Posts
Discussion Starter #1 (Edited)

Ford Shelby GT500 Interior LED Kit


At Diode Dynamics, we carry a full line of LED bulbs, to replace your Ford Shelby GT500's map lights, license plate lights, vanity lights, trunk light, turn signals, fog lights, and more!


We carry the brightest, highest-quality bulbs at the lowest prices. Your order will ship same day, and we're here if you need us for support and service. And we do not raise prices to astronomical levels- We're breaking that market trend, and offering you great, low prices, every day. These LED bulbs are designed by us here in St. Louis, and every bulb carries with it a three-year limited warranty.


Our LED Conversion Kits include all of the LED bulbs you need to replace the incandescent bulbs in your GT500, for interior and license locations. It has been tested in your specific vehicle, for perfect fitment, and no guesswork! No modification is required for installation, you simply replace the bulbs!


We are pleased to offer these LEDs in a truly customized way. You can create the kit that you prefer. Simply change the quantity to "0" for any bulbs that you do not wish to purchase.


By using the ordering options on this page, you can create your own mix-and-match kit by making the proper selections on each stage, or choose one whole kit that you prefer. The product pictures are professionally taken, at the same camera settings, in order to provide an accurate idea of what the bulbs will look like, in terms of brightness compared to the factory bulbs.

CLICK HERE FOR MORE INFO
2007-2014 Shelby GT500 Map LED

2007-2014 Shelby GT500 Trunk LED


Brightness. We offer three levels of brightness, or "stages." All stages will provide a sharp, modern LED look, and all include the same number of bulbs. Please be sure to read all of the following information:
  • Stage 1: Near factory brightness.
  • Stage 2: Slightly brighter than factory.
  • Stage 3: Much brighter than factory.
  • Stage 4 Flexlight: (Trunk only) This is a flexible LED strip with connector, for plug-and-play installation. It replaces your factory trunk light, and can be positioned anywhere you would like, with included velcro and adhesive.
All brightness levels are for general reference only, and apply only to the use of white LEDs. Please see the note below regarding the use of colored LEDs.


Please note that the stage 3 trunk light is often an LED board, which must be installed directly on top of the trunk light housing to achieve maximum brightness. All other lights will fit inside of the light housing with no modification. Some stage 3 interior lights use direct-replacement adapters with an LED board for maximum brightness.


Color. White is our most popular color. It is a 6000K cool LED white. We also offer yellow, green, blue, and red, at no additional charge. When making your color selections, please bear in mind that white projects the most usable light, so white will appear brighter than the same stage of a colored bulb, usually by one stage difference. For example, a red stage 3 light will have a similar usable light output as a stage 2 white light.


All products by Diode Dynamics are backed by a 30-day satisfaction guarantee and a three-year limited warranty.


Questions? Feel free to ask here, PM, email [email protected] or call us: (314) 205-3033

*PM us for the free-shipping code* (U.S. forum members only)

Thank you!
Nick C.
Diode Dynamics



Customer Submitted Photos:


Customer Review:


"Best lighting around! When I open my doors I turn night into day." (Posted on 10/24/13)

"Trunk light is a lot brighter now ..... Product lights up great at night for better visibility" (Posted on January 12, 2014)

"I needed a little more light in the trunk. Stage 2 white gets the job done and fits in the factory socket. The white is crisp and better than the yellowish factory bulbs." (Posted on November 20, 2013)

"My wife's light went out so I bought her one of these. Works great. This product is simply perfect." (Posted on August 20, 2013)

"I got the stage 2 blue for my trunk and it is awesome! Very bright despite the dark hue of blue and i love to show my friends at night! Definitely recommending to everyone i can!" (Posted on July 23, 2013)

"I found these on a Mustang Forum after looking long and hard for lighting to match the Black / Green color theme of my car. These lights are simply amazing! Several times brighter than stock, but more importantly, a much more "pure" light. The Green is very vibrant, and the quality of the product appears to be top notch. I had no idea how dim the factory trunk light was until I put in the LEDs. Easy to install and OH SO WORTH IT!" (Posted on April 26, 2013)

"I've tried other more costly LEDs in the past, and to date, nothing beats the quality of these LEDs. Perfect fitment, no issues." (Posted on April 5, 2013)
 

·
Registered
Joined
·
2,880 Posts
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

Ordered map, trunk, and license plate leds yesterday. If I get them in time I'll enter the contest.


Sent from my iPhone
 

·
Supporting Vendor
Joined
·
531 Posts
Discussion Starter #4
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

Ordered map, trunk, and license plate leds yesterday. If I get them in time I'll enter the contest.


Sent from my iPhone
Sounds great!

Let us know if there is anything else we can do to help

Nick C.
 

·
Registered
Joined
·
2,880 Posts
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

Got my leds today, the map lights don't fit through the hole, they are a larger diameter than the stock bulbs. Tomorrow I will trim the opening so they will fit. Don't have time tonight.


Sent from my iPhone
 

·
Supporting Vendor
Joined
·
531 Posts
Discussion Starter #7 (Edited)
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

How do your fog replacements match the headlights?


Sent from AutoGuide.com Free App
Our XML2 model comes in 3000K Yellow / 4000K / 5000K / 6000K I prefer 5000K for a great match to the factory HID's.

Here's an example of our XP's in the fog lights:



Customer submitted photo

Nick C.
 

·
Registered
Joined
·
2,880 Posts
FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

Got my leds today, the map lights don't fit through the hole, they are a larger diameter than the stock bulbs. Tomorrow I will trim the opening so they will fit. Don't have time tonight.


Sent from my iPhone

ImageUploadedByAG Free1402730198.340440.jpg

Got the leds to fit, took a little shaving around the opening with a dremel. iPhone picture doesn't do much justice, got the stage 3 bulbs, they are bright!


Sent from my iPhone
 

·
Premium Member
Joined
·
157 Posts
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

So, any feedback on these?
 

·
Premium Member
Joined
·
157 Posts
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

I was looking for real world feedback from people who have purchased your product.
Were they satisfied? How bright were the bulbs, specifically the higher end ones? How's longevity?
 

·
Supporting Vendor
Joined
·
531 Posts
Discussion Starter #14
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

I was looking for real world feedback from people who have purchased your product.
Were they satisfied? How bright were the bulbs, specifically the higher end ones? How's longevity?
I have them installed in my 2007 GT, I've had them for several years now.

They produce the perfect amount of brightness, without being too bright.

Also, they come with a 3-year limited warranty and ship free if you send us a PM

There's a few reviews here on the site as well: http://www.diodedynamics.com/store/led-bulbs/listed-by-vehicle/ford/mustang-gt/2005-2009-ford-mustang-gt-map-light-leds-pair-reviews.html

Nick C.
 

·
Premium Member
Joined
·
1,533 Posts
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

Got the leds to fit, took a little shaving around the opening with a dremel.
I did not have to use a dremel to get mine to fit. But I did consider it until I figured it out:

1. Don't try to go straight in!
2. Turn them 45* from upright and get one lip of the led in
3. then push straight down and the lower lip will also clear.

iPhone picture doesn't do much justice, got the stage 3 bulbs, they are bright!
I would agree that the lights are BRIGHT! I like it!
 

·
Supporting Vendor
Joined
·
531 Posts
Discussion Starter #17
Re: FS: GT500 Interior LEDs! Several brightness options! Plug and Play Upgrades

The Map Light Installation process is the exact same from 2005-2015+. They all use the same housing as well!


Nick C.
 
1 - 20 of 30 Posts
Top