Ford Shelby GT500 Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
164 Posts
Discussion Starter #1 (Edited)
I DIY for everything on my car, nice point of pride and skills to hold when your largest passion is cars.

As my power level went up and up I haven't made the vehicles safer other than better rotors and pads, it was time for a roll bar at least.

I fabricate on the side as a hobby and necessity, from custom pie cut intake and exhausts to any bracket brace or anything needed.

First go at making a roll bar/4 point cage.

2.jpg
3.jpg
1.jpg
4.jpg
5.jpg
6.jpg
7.jpg
8.jpg
9.jpg
10.jpg
11.jpg
12.jpg
 

·
Registered
Joined
·
164 Posts
Discussion Starter #2

·
Moderator/Admin Dude!
2020 Rapid Red/black 2011 Kona Blue/white
Joined
·
31,680 Posts
Dang! :surprise:

Nice DIY mod! Thanks for sharing it with us.
 

·
Registered
Joined
·
164 Posts
Discussion Starter #5
Thanks all!
 

·
Registered
Joined
·
164 Posts
Discussion Starter #10
Beautiful welds! Lets hope it's never necessary to use!
That's my thought as well, all built on the hopes that It'll never be needed.
 

·
Premium Member
Joined
·
1,985 Posts
Nicely done sir
 
1 - 11 of 11 Posts
Top