Ford Shelby GT500 Forum banner

Cobra Jet vinyl on a GT 500

467 Views 14 Replies 7 Participants Last post by  mavisky
2
Ok so before getting into the GT 500 camp I was on a search for a Ford Cobra Jet Drag only car. The Tremic 7 speed changed my direction. I still love the Cobra jet and I want to put one on my GT 500. So bare with me, I have a set of Drag pack coming from Forgeline, 11x18 rear and 8x20 front. Forgeline GS1R wheels 20x8.5 fronts, GS1R 18x11 rear with single bead-locks for 2020+ GT500. Gunmetal colored to offset the Satin Hypersilver spokes. With the wheels in mind envision the Cobra Graphic in Antimatter blue and hypersilver on my Code orange GT. Figure I will wrap the roof in Antimatter Blue too, plus the hood vent and hood locks. Pics are of the wheels, pics of the graphic aare for example only.
See less See more
  • Like
  • Love
  • Wow
Reactions: 5
1 - 15 of 15 Posts
So everything black on the cobra will be Ford Antimatter blue and the white will be silver. The bead locks will also need to be antimatter blue somehow. Thoughts???
  • Like
Reactions: 2
There will not be a number at this point so ignore that.
I say .... go for it .... !!! :)
  • Like
Reactions: 5
I have a complete set of CJ decals on my shelf. Haven鈥檛 had the guts to follow through.
  • Like
Reactions: 2
I have a complete set of CJ decals on my shelf. Haven鈥檛 had the guts to follow through.
What color? Did you buy them from Ford, I have a vinyl guy that can make them.
2
That car was at Ozarks International with ShelbyFest this month. It was the 1st GT350 I had seen with CFTP wheels. Owner said the tires rubbed a bit. The graphics were awesome in person!

See less See more
  • Like
  • Love
  • Helpful
Reactions: 5
2
Couple more:

See less See more
  • Love
  • Like
  • Helpful
Reactions: 5
What color? Did you buy them from Ford, I have a vinyl guy that can make them.
They鈥檙e an original Ford Performance set for a white car.
Ok so before getting into the GT 500 camp I was on a search for a Ford Cobra Jet Drag only car. The Tremic 7 speed changed my direction. I still love the Cobra jet and I want to put one on my GT 500. So bare with me, I have a set of Drag pack coming from Forgeline, 11x18 rear and 8x20 front. Forgeline GS1R wheels 20x8.5 fronts, GS1R 18x11 rear with single bead-locks for 2020+ GT500. Gunmetal colored to offset the Satin Hypersilver spokes. With the wheels in mind envision the Cobra Graphic in Antimatter blue and hypersilver on my Code orange GT. Figure I will wrap the roof in Antimatter Blue too, plus the hood vent and hood locks. Pics are of the wheels, pics of the graphic aare for example only. View attachment 276906 View attachment 276907
That's pretty sweet. I say run with it.
  • Like
Reactions: 4
That's pretty sweet. I say run with it.
Agree its sweet, I like it :)
  • Like
Reactions: 3
You can get the pictured graphics in any color you want from Bemaro Films.
  • Like
  • Helpful
Reactions: 5
What color? Did you buy them from Ford, I have a vinyl guy that can make them.
I have a vinyl guy that bought the cut program, finalizing color now.
  • Like
Reactions: 3
You can get the pictured graphics in any color you want from Bemaro Films.
I could not find the cobra on their site, I am sure it it my error.
I could not find the cobra on their site, I am sure it it my error.
No, it looks like it's only listed on the GT350/GT350R section even though the applicable sections of the car where the graphics would attach are the same between both. I'm sure if you called and asked he could also eliminate the "number placard" on the door that you wouldn't need for your goals. I also can't identify the differences between package #3 and #4 as the colors are all customizable so that's worth a call or communication alone.


  • Like
Reactions: 4
1 - 15 of 15 Posts
Top