[GT500FREAK]

I found the fix to the brake dust problem. $15 armor all, brake dust repellent

 

[GT500FREAK]

I’ll try anything once

I use it on my f250, last for about 3500 miles, pending on rain and idiot homeowners that cant adjust their irrigation system. So I said what the heck. So far so good , make sure the wheels are dry

 

[GT500FREAK]

What's the best way to avoid getting it on the rotor?

Didn't effect my brakes in the least

 

[GT500FREAK]

What's the best way to avoid getting it on the rotor?

I've used it for years on my f250

 

[GT500FREAK]

Just ordered the Armor All, excited to try it…

Cause DAMN these brakes put out some dust!!

It has been a week, I'm doing the happy dance, wheels look great, just make sure they are dry and do not touch them,

 

[GT500FREAK]

Works like a charm. Have been using it for a year. Goes a long way too, many applications from one can.

1 can usually lasts for about 4 applications on my f250, I kind of over did it on my gt500, over half a can,

 

[GT500FREAK]

Has anyone noticed that the price for this stuff has almost doubled in the past week?! I need to find somewhere local that sells it...

I bought 3 cans for $45. It used to be $12.99

 

[GT500FREAK]

Amazon wants over $28 now! I thought I saw it on eBay for lower but I have my doubts about them.

Ebay is where I purchased mine, no problem

 

[GT500FREAK]

Works well! I'd say an 80% reduction, which is a TON. Thanks for the tip friends!

You are more than welcome, brother

 

[GT500FREAK]

Works well! I'd say an 80% reduction, which is a TON. Thanks for the tip friends!

I'm still at 100% reduction, must be dry and you can't touch the rim

 

[GT500FREAK]

armor all, huh? how does it compare to all the ceramic coatings and sio2 sprays out there that you can also easily apply to the wheels?

I had ceramic coating on my 2019 bullitt, that would still dust up, the picture I posted was after driving it for a couple days,

 

[GT500FREAK]

My wheels are ceramic coated but the foam cannon and pressure washer don't get it done so I will be trying as well.

Day 5

 

[GT500FREAK]

keep reading reviews of some film and gunk after a while from this product that is very tough to remove.

I've been using it for years, no film or gunk,

 

[GT500FREAK]

I need to get that for the Explorer, cuz the front wheels get filthy really quick.

My f250 was my test rat. 100's of thousands of miles, love it, after about 3500 miles I clean and reapply

 

[GT500FREAK]

so you just spray it all over the spokes and the inner barrel? does it get on the rotor?

Yes, unless you feel the need to tape off the rotor, like I said used it for years, works great,

 

[GT500FREAK]

if you can, pls detail exactly your process of using it thanks...

It's on the can under directions, wash, rinse,dry, apply and DON'T TOUCH,

 

[GT500FREAK]

I've never experienced anything like that when using the product. You don't have to go crazy with it, either. Just a couple quick circular sprays on the wheel is enough. One can of spray will easily lasts five or six washes.

You are right, I've been using it for years, the barrel being 11 inches deep made go a little overboard. I posted 5th day picture and still looking good

 

[GT500FREAK]

You are right, I've been using it for years, the barrel being 11 inches deep made go a little overboard. I posted 5th day picture and still looking good

o
Here f250 lab rat 4867 miles, (I did the repellent during last engine service)

 

[GT500FREAK]

Here f250 lab rat 4867 miles, (I did the repellent during last engine service)

 

[GT500FREAK]

Day 9 still looking good