Ford Shelby GT500 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
Hey guys, So I would like to throw my set up out there and I hope it helps some others out. 2013 GT500

First. My car is lowered using the Ford Racing springs (M-5300-L). They say .4" in the Front and 1" in the Rear. after measurements that is accurate.

For the wheels, I decided to go with the (CS14-215455-B) for the rear and (CS14-295430-B) for the front
20X11 with a 50mm offset in the rear and a 20x9.5 with a 40mm offset in the front. They both sit extremely flush. perfect i would say.
The rear rim fits without any modification to the boot or hold down bracket. I had already bought the stuff to take that bracket off and bought bump stop relocation
brackets, But it looks like i wont need to use them. NICE!

For the tires, I decided to go with Michelin Pilot Sport Cup 2 (325/30R20) for the rear and it is the same height as the stock 285. for the front i went with (265/35R20).
I chose the 265 in the front because I don't track the car and mainly just red light drag race. To keep the same height in the front i would need to fit a 305/30
in front and i'll tackle that headache another day.

202961
202962

202966
202972
 

·
Moderator/Admin Dude!
2020 CFTP Rapid Red! 2011 Kona Blue/white
Joined
·
35,265 Posts
Hey guys, So I would like to throw my set up out there and I hope it helps some others out. 2013 GT500

First. My car is lowered using the Ford Racing springs (M-5300-L). They say .4" in the Front and 1" in the Rear. after measurements that is accurate.

For the wheels, I decided to go with the (CS14-215455-B) for the rear and (CS14-295430-B) for the front
20X11 with a 50mm offset in the rear and a 20x9.5 with a 40mm offset in the front. They both sit extremely flush. perfect i would say.
The rear rim fits without any modification to the boot or hold down bracket. I had already bought the stuff to take that bracket off and bought bump stop relocation
brackets, But it looks like i wont need to use them. NICE!

For the tires, I decided to go with Michelin Pilot Sport Cup 2 (325/30R20) for the rear and it is the same height as the stock 285. for the front i went with (265/35R20).
I chose the 265 in the front because I don't track the car and mainly just red light drag race. To keep the same height in the front i would need to fit a 305/30
in front and i'll tackle that headache another day.

View attachment 202961 View attachment 202962
View attachment 202966 View attachment 202972
Awesome helpful first post! Welcome to the forum!

If you are up for introducing yourself and showing us more of your beautiful Shelby, you’ll find our new member area here:

 
1 - 2 of 2 Posts
Top