Ford Shelby GT500 Forum banner
121 - 140 of 179 Posts

·
Registered
2020 GT500
Joined
·
20 Posts
I have an old android scope with a small mirror that attaches at a 45 degree angle. 11/20 build date. I think I am ok.
chain tensioner picjpg.jpg
 
  • Like
Reactions: Goose17

·
Registered
'21 GT500 Shelby & '69 Mach1
Joined
·
130 Posts
checked mine tonight - all good. Evan Bradley was my builder.
 
  • Like
Reactions: Goose17

·
Registered
2020 GT500
Joined
·
85 Posts
L3932 is all good. First service rep was a bit of a grump but luckily another one stepped in and it was all very smooth after that. Tech came out to the lot and checked it there.

Edit: Matt Thomas was the engine builder on mine.

215820


She said she was hungry so we stopped for breakfast on the way back. ;)

215821
 

·
Registered
Joined
·
190 Posts
L3932 is all good. First service rep was a bit of a grump but luckily another one stepped in and it was all very smooth after that. Tech came out to the lot and checked it there.

Edit: Matt Thomas was the engine builder on mine.

View attachment 215820

She said she was hungry so we stopped for breakfast on the way back. ;)

View attachment 215821
L3932 is all good. First service rep was a bit of a grump but luckily another one stepped in and it was all very smooth after that. Tech came out to the lot and checked it there.

Edit: Matt Thomas was the engine builder on mine.

View attachment 215820

She said she was hungry so we stopped for breakfast on the way back. ;)

View attachment 215821
Nice car!
Glad it passed:)
Like your wheels.If I ever trash one of my Carbon front wheels I will go thru Terrance and get your set up.I currently have 850 miles on my 2021 CFTP.Im not bothering with chain tensioner check unless they are willing at next weeks oil change to check.
 

·
Registered
2020 GT500
Joined
·
8 Posts
Good evening all. This is my first post. I think I’m good, please verify.
216030

216031

216032
 

·
Registered
2020 GT500
Joined
·
8 Posts
I second that, looks good to me as well.
Thanks guys. This was after driving a couple hours ago. Do I need to take a picture of it in the morning before starting as well?
 

·
Moderator/Admin Dude!
2020 CFTP Red! 2011 Kona Blue
Joined
·
33,715 Posts
Thanks guys. This was after driving a couple hours ago. Do I need to take a picture of it in the morning before starting as well?
Looks good. No need to worry. Welcome to the forum! If you are up for introducing yourself and showing us your Shelby, you’ll find our new member area here:

 
  • Like
Reactions: gt500jake

·
Premium Member
2020 Shelby GT500 base + handling pack
Joined
·
921 Posts
Thanks guys. This was after driving a couple hours ago. Do I need to take a picture of it in the morning before starting as well?
The way I understand it - if you can see the groove at all you're good. A locked tensioner will never show it.
 

·
Registered
2020 GT500 Oxford White / Fully Loaded
Joined
·
185 Posts
Discussion Starter · #135 ·
The way I understand it - if you can see the groove at all you're good. A locked tensioner will never show it.
You are correct, if it is not activated, the tensioner will be in that initial locked position, hence no groove.
 
  • Like
Reactions: DKnight

·
Moderator/Admin Dude!
2020 CFTP Red! 2011 Kona Blue
Joined
·
33,715 Posts

·
Registered
2020 GT500 Twister Orange
Joined
·
60 Posts
Curious if any GT500 owners have found theirs Not Activated? I know on another board several GT350 owners had found theirs not activated. Wondering if its predominantly a GT350 issue?
 
  • Like
Reactions: DKnight

·
Registered
2020 GT500 Oxford White / Fully Loaded
Joined
·
185 Posts
Discussion Starter · #140 ·
Curious if any GT500 owners have found theirs Not Activated? I know on another board several GT350 owners had found theirs not activated. Wondering if its predominantly a GT350 issue?
I have heard of a few GT500s that did not have it activated and were in the date range.
 
121 - 140 of 179 Posts
Top