Does anyone know where I can a chromed strut tower brace?I would prefer a double rod but a single would be ok.Thanks...........07.......................

Have you checked with BBK Performance (http://www.bbkperformance.com/products/gripp.shtml)? I don't know if they've got one for a Shelby yet, but they seem to have them for several different Mustang models.

What about just sending your stock one to a chromer. It might be cheaper.

Maybe find a local chrome shop to strip and chrome your stock one.

Thanks guys but I like to keep all the original parts.

Would like to save stock wheels and rubber for collectability before I wear them out. Any suggestions on drag radials for the rear and new shoes for the front. Am looking at 50resto for wheels. Any suggestions would be appreciated.

I'm going to save the stock wheels as well, but probably not the rubber. Tires age with time, and are unsafe when too old (6+ years?), even when not used. If figure I'll just use them up.

I'm really leaning toward the American Racing Shelby Razor wheels (http://www.americanracing.com/wheels/details.asp?wheelid=228&name=Shelby%20Razor&style=198S&desc=1-piece%20painted/machined%20alloy&section=SL). I'd like to have 18 x 9's on the front and 18 x 10's on the back, but I haven't gotten confirmation on the size availability for the GT500 version yet (not on website yet).

For those changing wheels, remember to have the tire pressure sensors moved over! The sensors will have to be retrained for the new tires/wheels.

I am leaning to the sames size configuration thanks keep me abreast.

has anyone seen a chrome outside door handle being sold?

Any feed back on offset and backspacing for 9" fronts and 10" rears? Prez I think I will take your advice and spread some rubber around on my stock shoes. No sense on saving tires that will degenerate with time. Thanks

rpretzel - nice wheels!!

Any information on stock bolt pattern? I know the stock off set is +45mm but am not sure of bolt pattern, which I believe is of 5x4.5.

rpretzel - nice wheels!!

Real nice looking wheels. I just wish that I had a Shelby in the garage to put them on. I guess I can't complain that much though, yet. I've only been on material hold for 2 months.

My suggestion on 18s is front Toyo 255x45x18s on 18x9s & rear 285x40x18 on 18x10 rears. I plan to run front Silver Metallic Replica GT-R 20x9s on Nitto 255x65x20s & rear 20x9s on 275x35x20s. This is one bad ass wheel & tire combo. I'll post pics as soon as my car gets in & yes it will be lowered.

ssss07,
Latemodel Resteration .com might have what you need. Part Number put-400022. Overlay Chrome

ssss07,
Latemodel Resteration .com might have what you need. Part Number put-400022. Overlay Chrome
thx ill look it up

My suggestion on 18s is front Toyo 255x45x18s on 18x9s & rear 285x40x18 on 18x10 rears. I plan to run front Silver Metallic Replica GT-R 20x9s on Nitto 255x65x20s & rear 20x9s on 275x35x20s. This is one bad ass wheel & tire combo. I'll post pics as soon as my car gets in & yes it will be lowered.

Sounds like a great combination. I'm leaning towards a bullitt style wheel in anthracite. Kind of an old Cragar look and the anthracite will kind of blend with the tungstgen. I guess I'm showing my age once again. Rubber sounds right on.

I love the wheels so much I am pricing out a set of stock rims for posterity's sake, and will enjoy the hell out of these wheels. Rubber is an issue I will address when Old Abe tells me to. I will post pricing once I receive it from my honorable dealer. I say that because after all how many dealers are not joining in this shark feeding frenzy, if you know what I mean? As I previously mentioned a local dealer sold not one, but two uints at $25,000 over MSRP. A grabbber orange convertible with no upgrades and an ebony coupe.

I love the wheels so much I am pricing out a set of stock rims for posterity's sake, and will enjoy the hell out of these wheels. Rubber is an issue I will address when Old Abe tells me to. I will post pricing once I receive it from my honorable dealer. I say that because after all how many dealers are not joining in this shark feeding frenzy, if you know what I mean? As I previously mentioned a local dealer sold not one, but two uints at $25,000 over MSRP. A grabbber orange convertible with no upgrades and an ebony coupe.



Well God Bless his pocketbook.

Well God Bless his pocketbook.

07 at MSRP I can afford to.:p Ouch!

07,

I just think you are upset that Performance White is schooling Torch Red in the color preference of the Poll?:D:D How do feel about that oldimp?

07,

I just think you are upset that Performance White is schooling Torch Red in the color preference of the Poll?:D:D How do feel about that oldimp?



I would like to go to the same school!The color preference has not been answered by all.Let me know if you come into town I will show you my school!

I would like to go to the same school!The color preference has not been answered by all.Let me know if you come into town I will show you my school!

Any time any place. How about Romeo? Let's not make this a show down or should we?:D: After all you were the first to mention your Casa.

07,

I just think you are upset that Performance White is schooling Torch Red in the color preference of the Poll?:D:D How do feel about that oldimp?

Performance White! That's my baby! I can only think of one Torch Red Shelby that I might trade my baby for! And red is my favorite color! A lot of love went into building my EMMY G! We have the same birthday, you know! Nah, I could never let it go!

As for the poll, I think that after it is said and done, the red will be the most popular choice, followed fairly close by the white and then the blue. I have seen these results on another poll with a lot of voters. All the combinations look great on this car! I would have been thrilled to accept any one of them had I not had a choice.

MGW now has pictures of their dip stick handle but not their license plate bracket. Mine are on the way and will let you know how they look upon arrival. So as to keep all stock parts for my Shelby I have ordered a dipstick from dealer. The MGW product is obviously the handle only.

MGW now has pictures of their dip stick handle but not their license plate bracket. Mine are on the way and will let you know how they look upon arrival. So as to keep all stock parts for my Shelby I have ordered a dipstick from dealer. The MGW product is obviously the handle only.

I want to do the same thing, how much was the dipstick? I got my radiator caps and oil cap yesterday!

I did not even ask but placed a call into him after your post and as soon as he gets back to me I will let you know. You may also want to shop around though because he only charged me $57 plus tax for the sun visor, and I believe you stated $80 in a previous thread. Am also trying to confirm he orders the right dip stick because I am not sure if the oil pan capacity is different than a standard 5.4. I believe they are the same because my F150 holds a similar amount of oil as the Shelby.

I want to do the same thing, how much was the dipstick? I got my radiator caps and oil cap yesterday!

The dipstick is $28.00

The dipstick is $28.00

I think oldimp is referring to the stock dip stick?

My dip stick should be arriving today

UPS just delivered my MGW toys. License plate bracket with recessed srews, two raditor caps, oil cap and power outlet plug. They look great! The license plate bracket was a little steep at $58 but well worth it. Their stuff is top shelf. Thanks 07 for you were the first to turn us on to their website.:):):) By the way no need to order a stock dip stick because MGW' mounts over the stock handle with two allen screws. Will keep my order in though because the screws will propably damage the stock handle. Now all we need are power steering and break resevoir caps and we are set. Will call George at MGW and suggest just that. Happy ordering folks.

UPS just delivered my MGW toys. License plate bracket with recessed srews, two raditor caps, oil cap and power outlet plug. They look great! The license plate bracket was a little steep at $58 but well worth it.

Would you please take a picture of the license plate bracket and post it for us? Thanks very much! Oh, and maybe the dipstick after it is installed, too!

In my excitement in opening MGW's gift package I have noticed the stock handle will not receive the new one without cutting down the stock piece. I will call MGW on Monday or tomorrow, hours permitting, to verify such before attempting this task. Hold on to your stock dip stick orders. Also the screws they supplied for the license plate, optional for those who are interested and a must for neat installatiion, are a fine tread(six mm to be exact) and I will be looking for stainless steel bolts to back them up for a secure application, as the trippple chrome plate bracket is quite heavy in design.

Would you please take a picture of the license plate bracket and post it for us? Thanks very much! Oh, and maybe the dipstick after it is installed, too!

oldimp,

I am still quite old school when it comes to that stuff, as my sons have a digital camera and they are away at school, but my neighbors kid does and I will do my best.

Peace,
shlbysvt

Here you go, shlbysvt: Digital Camera (http://www.amazon.com/Polaroid-PDC-4355-Megapixel-Digital-Optical/dp/B0003UJ04E/sr=1-13/qid=1159568737/ref=sr_1_13/002-4268569-6801610?ie=UTF8&s=photo) :D

Here you go, shlbysvt: Digital Camera (http://www.amazon.com/Polaroid-PDC-4355-Megapixel-Digital-Optical/dp/B0003UJ04E/sr=1-13/qid=1159568737/ref=sr_1_13/002-4268569-6801610?ie=UTF8&s=photo) :D

Hang in there Prez, on the way!

If I'm going to have to wait until April/May/June 2007 to get my Shelby, I'm going to have to live vicariously through you guys for a loooong time. That means I need lots of pictures and stories!!! :D :D :D

Getting a little dark here so tomorrow may have to do but I promise a digital is on the way. Took some great photos though today with the Long Island Sound in the back ground with an old school 35mm camera.

oldimp,

I am still quite old school when it comes to that stuff, as my sons have a digital camera and they are away at school, but my neighbors kid does and I will do my best.

Peace,
shlbysvt


Can you say GROOVY or how about COOL BEANS DADDY-O.Did you use an Abucus in math?

Okay boys and girls here we go, I will try and do better tomorrow with the help of my neighbors son. Dip stick handle taking center stage.

http://img.photobucket.com/albums/v385/wakebrding247/Mr%20Logal%20Pics/DSC01573.jpg

Can you say GROOVY or how about COOL BEANS DADDY-O.Did you use an Abucus in math?

By the way 07 I did not use an abucus but did use a slide rule.:)

I have a chrome three point strut tower brace on my 2005 Roush from HP performance parts in Omaha. It is the only one that I know of as they usually are painted or powder coated. It works great as do the lower control arms and adjustable panhard rod.

There phone # is 402-731-7301

Good Luck.

I have a chrome three point strut tower brace on my 2005 Roush from HP performance parts in Omaha. It is the only one that I know of as they usually are painted or powder coated. It works great as do the lower control arms and adjustable panhard rod.

There phone # is 402-731-7301

Good Luck.



Thank you,you are the guy I have been waiting for.Do you have any pictures you would like share or would you e-mail them to me?Anyways thanks..................07........................ ......

Okay folks, ask and you shall receive! Better pics coming tomorrow with day light. Dip stick handle obviously taking center stage.

Thanks very much! That is what I needed to see.

Thank you,you are the guy I have been waiting for.Do you have any pictures you would like share or would you e-mail them to me?Anyways thanks..................07........................ ......

07,

Let us know how it works out. I would like to do the same.

The MGW dipstick handle comes with mounting instructions and alen wrench for installation. The stock dipstick handle must be cut down in installation so some may wish to order a stock dipstick, as I did for preservation of all stock parts. Pics to follow after 5PM EST, when my neighbors son gets back from work. Still do not own a digital camera yet.:o

Received the MGW dipstick handle on Friday - very nice. I see you need to cut the dipstick handle to put on the chrome handle - has anyone done this yet? Picking up a stock dipstick to be cut down sounds like a good idea.

Okay boys and girls here we go, I will try and do better tomorrow with the help of my neighbors son. Dip stick handle taking center stage.

http://img.photobucket.com/albums/v385/wakebrding247/Mr%20Logal%20Pics/DSC01573.jpg



Thanks for the picture.That license plate bracket is a must.Very,very nice.Can't wait to tell my wife she needs one of these.She will just give me that look.Whats a slide rule?I am only 46.

As promised pics of parts installed. Including break resevoir fix posted by rpretzel. Fuse box cover in process of being signed by Carroll Shelby that is reason of its absence.

shlbysvt - nice job. I've put on the same chrome parts except the dip stick handle. I want to pick up another dip stick to save the original dip stick. The only think I don't have is the chrome license plate frame - is that a must have? Thanks.

shlbysvt - nice job. I've put on the same chrome parts except the dip stick handle. I want to pick up another dip stick to save the original dip stick. The only think I don't have is the chrome license plate frame - is that a must have? Thanks.

Aldy,

The chrome license plate is definitely a must. MGW products are top shelf as stated before and this item really frames a vanity plate. Be sure to order the recessed screws as they compliment the frame and make theft a little harder. When my vanity plate arrives, will post pics.

07 any information on the chrome tower strut brace?

Aldy,

The chrome license plate is definitely a must. MGW products are top shelf as stated before and this item really frames a vanity plate. Be sure to order the recessed screws as they compliment the frame and make theft a little harder. When my vanity plate arrives, will post pics.

07 any information on the chrome tower strut brace?



Yes,they need a Shelby to take measurements.Seems a little pricey though.$250 for the chroming + the cost of the strut brace,which he didn't state.

Yes,they need a Shelby to take measurements.Seems a little pricey though.$250 for the chroming + the cost of the strut brace,which he didn't state.

Thanks for the reply 07. Let me know when pictures and quality of the brace is available. With regard to the stock dipsticks, they are currently not availble through my dealers parts department but will let folks know as soon as they are so as to keep all stock parts in inventory for the future.

The license plate frame looks high quality, only problem I see from the picture is it looks like you must drill your front bumper unless they have a drill less solution. The license plate could be made out of 24K gold but I am not drilling the front bumper. :(

The license plate frame looks high quality, only problem I see from the picture is it looks like you must drill your front bumper unless they have a drill less solution. The license plate could be made out of 24K gold but I am not drilling the front bumper. :(

Could not agree more, but this frame is for the rear bumber only. My Shelby will go plateless in the front no matter what the man says!:(

Has anyone seen a nice cobra key chain available? The one I got from the dealer is pretty cheesy.

Has anyone seen a nice cobra key chain available? The one I got from the dealer is pretty cheesy.

Aldy, I bought one of the Cobra key chains from the Ford site back before I got the Shelby and it is the Cobra, just like the fender tag and pretty big! Too big for my liking. Now they have another one listed on the GT500 stuff that is just like the fake gas cap and appears to be about the same size as the key ring. It is $6 and I think I will order a couple of them, maybe this evening!

Aldy, I bought one of the Cobra key chains from the Ford site back before I got the Shelby and it is the Cobra, just like the fender tag and pretty big! Too big for my liking. Now they have another one listed on the GT500 stuff that is just like the fake gas cap and appears to be about the same size as the key ring. It is $6 and I think I will order a couple of them, maybe this evening!

Oldimp,

According to the site I believe they state it is 1.5" in diameter. Ordered two. Thanks Oldimp.:)

Oldimp,

According to the site I believe they state it is 1.5" in diameter. Ordered two. Thanks Oldimp.:)

That sounds pretty big! Still think I had better order one or two! Thanks!

Did you find the key chain on the Ford website or another site? Thanks.

There are several places I have seen them.I have a couple of different ones but I know Steeda has them and E-bay has them.I will look for my paperwork to see where I bought mine.I have even seen them with a real Cobra head on them.Do a Google search on Cobra Key Chains!.........07...............

Thanks 07

Did you find the key chain on the Ford website or another site? Thanks.

The two I am talking about are on the Ford site.

http://www.fordcollection.com/default.cfm?fuse=productDetail&item__code=S69006&user_category=GIFTACC

and

http://www.fordcollection.com/default.cfm?fuse=productDetail&item__code=S43089&user_category=GIFTACC

Pretty cheap, $6 for the gas cap one and $9 for the Cobra. Plus shipping. The shipping for two of the Cobra rings was $4.95.

The two I am talking about are on the Ford site.

http://www.fordcollection.com/default.cfm?fuse=productDetail&item__code=S69006&user_category=GIFTACC

and

http://www.fordcollection.com/default.cfm?fuse=productDetail&item__code=S43089&user_category=GIFTACC

Pretty cheap, $6 for the gas cap one and $9 for the Cobra. Plus shipping. The shipping for two of the Cobra rings was $4.95.

What's nice about the Ford site no shipping costs! That's where these site and the old mail order services make their money, in shipping. Sorry oldimp it must pertain to location for old NY there was no shipping cost.

What's nice about the Ford site no shipping costs! That's where these site and the old mail order services make their money, in shipping. Sorry oldimp it must pertain to location for old NY there was no shipping cost.

Bummer, Dude! I actually think I got something from them without shipping added some time or other, but the last couple of times I know I got charged! Could it be a recent change, or are they abusing the rubes of sunny South Carolina?

Bummer, Dude! I actually think I got something from them without shipping added some time or other, but the last couple of times I know I got charged! Could it be a recent change, or are they abusing the rubes of sunny South Carolina?

I hope not old dude but will let you know as soon as I get the final bill!:confused:

I found the cobra key chain mentioned by oldimp and shlbysvt at the stangwear site. I found another nice looking key chain at car-collectibles.com. It's a round chrome key chain with the Cobra symbol plus you get up to 30 characters engraved in the back. It's a bit more expensive at $20. I think I might order one of each.

The two I am talking about are on the Ford site.

http://www.fordcollection.com/default.cfm?fuse=productDetail&item__code=S69006&user_category=GIFTACC

and

http://www.fordcollection.com/default.cfm?fuse=productDetail&item__code=S43089&user_category=GIFTACC

Pretty cheap, $6 for the gas cap one and $9 for the Cobra. Plus shipping. The shipping for two of the Cobra rings was $4.95.



Oldimp,old buddy.I bought the valve stem Cobras,pewter Cobra key chain and Mustang pony keychain at Stangwear.com.The valve stem Cobras are really cool,a little pricey but worth it................07...........................

Does anyone know where Lemonhead films are located.I want whatever they are taking..............................07............ .....................

They gotta be from the south!

Oldimp,old buddy.I bought the valve stem Cobras,pewter Cobra key chain and Mustang pony keychain at Stangwear.com.The valve stem Cobras are really cool,a little pricey but worth it................07...........................

Good choice 07. Tried to order but currently out of stock.:( Will try again ASAP.

Does anyone know where Lemonhead films are located.I want whatever they are taking..............................07............ .....................

They gotta be from the south!

Predominately from the south I'd say! I can put you in contact with the Lemonhead Production Director if you would like. They are not currently accepting outside projects. They are in the process of upgrading their camera equipment. I believe their current productions are mainly tintype prints stacked and flipped through.

Predominately from the south I'd say! I can put you in contact with the Lemonhead Production Director if you would like. They are not currently accepting outside projects. They are in the process of upgrading their camera equipment. I believe their current productions are mainly tintype prints stacked and flipped through.



Hey Lemonhead Inc.,Director of Shelbyology, Mustang owner extraordinare how are you?Freddie says hi!Still a little box shy but diggin the color red.He said the White Stripes make Sherry go faster!I think he is right!....................07...................... .......

If you go to fordartehouse.com they have some cool prints of Mustangs and Shelbys. I just ordered the limited edition print authorized by Carroll Shelby - oldimp will like the color of the Shelby they used in the print.

If you go to fordartehouse.com they have some cool prints of Mustangs and Shelbys. I just ordered the limited edition print authorized by Carroll Shelby - oldimp will like the color of the Shelby they used in the print.

Aldy, I have mine already hung! I got #43!

I have one of those, too. Great quality print.

I doubt the number means much, but I got #3.

I have one of those, too. Great quality print.

I doubt the number means much, but I got #3.

In prints only the number 1 has any collectors value.(Must also be signed and numbered) I ordered one as well but believe they are not signed prints.:( Reason the for the differnce between the GT350H print and the GT500 series. Has anyone seen a signed litho of such prints by Carroll Shelby? Would love to have one for my wall.

I believe he signs the GT350 print, hence the additional cost of the print. I guess another option is to order the limited addition print, take it out of the frame and then send it to be autographed by Carroll Shelby for $215. Total cost would be $514, which is cheaper than the GT350 print.

QUOTE=07 SHELBY;4186]Hey Lemonhead Inc.,Director of Shelbyology, Mustang owner extraordinare how are you?Freddie says hi!Still a little box shy but diggin the color red.He said the White Stripes make Sherry go faster!I think he is right!....................07...................... .......[/QUOTE]

07

Help me on this one because I would like to share the moment. Are you speaking of, Lemon Head and Animal Farm or am I really Old School and have no idea of what you are speaking of?

HELP

One too many Marinti's. Beer Here!

QUOTE=07 SHELBY;4186]Hey Lemonhead Inc.,Director of Shelbyology, Mustang owner extraordinare how are you?Freddie says hi!Still a little box shy but diggin the color red.He said the White Stripes make Sherry go faster!I think he is right!....................07...................... .......

07

Help me on this one because I would like to share the moment. Are you speaking of, Lemon Head and Animal Farm or am I really Old School and have no idea of what you are speaking of?

HELP

One too many Marinti's. Beer Here![/QUOTE]




It must be old school because I don't even know what that is.As far as sharing the moment,it is a long standing joke between Oldimp and myself and it just popped up in the thread.Sorry for any misleading statements.Isn't that right old buddy......................07(AARP)............... ...........

07

Help me on this one because I would like to share the moment. Are you speaking of, Lemon Head and Animal Farm or am I really Old School and have no idea of what you are speaking of?

HELP

One too many Marinti's. Beer Here!




It must be old school because I don't even know what that is.As far as sharing the moment,it is a long standing joke between Oldimp and myself and it just popped up in the thread.Sorry for any misleading statements.Isn't that right old buddy......................07(AARP)............... ...........[/QUOTE]

Now AARP is a familiar quote! Animal Farm was required reading when in school. Food for thought.:)

It must be old school because I don't even know what that is.As far as sharing the moment,it is a long standing joke between Oldimp and myself and it just popped up in the thread.Sorry for any misleading statements.Isn't that right old buddy......................07(AARP)............... ...........

I'd say that pretty well sums it up! Very graceful of you! Just the facts, Maam!

Just an FYI...I purchased one of these "GT500 Carroll Shelby Motors" license plate frames from Mustangs Unlimited on eBay for about $10 shipping incl. They are kinda old skool looking and nice quality for a die cast frame. They are chrome frame/chrome letters with a blue background that is strikingly similar to 'Vista Blue'...I have included the eBay link below...or you can search eBay using "Shelby Frame" and see the whole variety of Shelby License Plate Frames that are available...:)

http://cgi.ebay.com/ebaymotors/1967-1970-SHELBY-GT500-LICENSE-PLATE-FRAME-WOW_W0QQcmdZViewItemQQcategoryZ6763QQihZ003QQitemZ 130034010569QQrdZ1QQsspagenameZWDVW