Here's a short list of what we sell and do:

We have many parts IN STOCK!
We just moved into a larger shop and have just about finished our show room that's loaded with parts for your Mustang, Truck, Shelby GT500, Marauder, Lightning and Focus like:

I have highlighted some GT500 parts.

JLT intakes, PVC Pre filters, CF mirror covers, Rad. support/fuse box covers and more
SCT X-3's & LiveWire tuners and Big air MAF's
Diablosport tuners and MAFia's
S&B filers hundreds in stock
Silver Horse Racing 05-up Billet cup holders, shifter bezals, rear medallions, rear honeycomb panels, billet gas doors, sequential tail lights, climate control knobs and side window louvers
Fore Precision 03,04 Cobra and Modular parts like: Billet Cobra hood vents, side scoops and coil covers
Ford Racing lowering springs, exhaust, engine covers, Pre painted strut bars, GT coil covers and more
Redline Tuning hood lifters for Mustangs, Focus and most anything, plus there truck tail gate EZ Downs.
METCO Cobra, Shelby and Lightning S/C pulleys, idler pulleys, pulley tools, drive shaft loops, suspension parts and more.
Professional Products throttle bodies and upper plenums
S&B intakes for Diesels trucks

If you have any questions about any of these parts, please feel free to give us a call.

Jay,

Do you carry a good tune and CAI for my wifeys 2007 GT/CS ?

http://i186.photobucket.com/albums/x53/Grabrrr/2007%20California%20Special/CaliforniaSpecial007.jpg

Jay,

Do you carry a good tune and CAI for my wifeys 2007 GT/CS ?


I thought you were looking at a SC for it??

I thought you were looking at a SC for it??

It's too much money. I want to wake up the throttle response and I think a CAI and Tune will do that.

Sure do Rob.
It's our 2007 GT kit. 5.0 did a shootout a few years back and we were highest HP & TQ producre of 11 kits.
Offered in black and your exact color.
We do have HP white!

Call me when your ready.

Jay

Sure do Rob.
It's our 2007 GT kit. 5.0 did a shootout a few years back and we were highest HP & TQ producre of 11 kits.
Offered in black and your exact color.
We do have HP white!

Call me when your ready.

Jay

Jay,

I just tried to call. I forgot we have a 3 hour time difference. Do you think that set up will give a little more snappyness to the gas pedal. Kinda eliminate some of the lag time. Does the CAI require that I flash a tune into the car like I did with my GT500. Also what's the HP gain, and what does the kit cost. I am just about ready to pull the trigger on this.

Jay,

I just tried to call. I forgot we have a 3 hour time difference. Do you think that set up will give a little more snappyness to the gas pedal. Kinda eliminate some of the lag time. Does the CAI require that I flash a tune into the car like I did with my GT500. Also what's the HP gain, and what does the kit cost. I am just about ready to pull the trigger on this.


2005-UP MUSTANG GT JLT Intake kit w/ SCT X- 3

http://jlttruecoldair.com/zencart/index.php?main_page=product_info&cPath=1_9_25_43&products_id=86


Maybe you can re-use your existing SCT tuner and just have Jay email you a tune for the GT to save $$.

Rob,
The tune greatlt improves throttle responce and will net about 20-30 RWHP depending on fuel used.
You will need to reflash the computer just like the GT500. Same deal.

Retail $555 in black and $570 in color.

Jay

Here's a short list of what we sell and do:

We have many parts IN STOCK!
We just moved into a larger shop and have just about finished our show room that's loaded with parts for your Mustang, Truck, Shelby GT500, Marauder, Lightning and Focus like:

I have highlighted some GT500 parts.

JLT intakes, PVC Pre filters, CF mirror covers, Rad. support/fuse box covers and more
SCT X-3's & LiveWire tuners and Big air MAF's
Diablosport tuners and MAFia's
S&B filers hundreds in stock
Silver Horse Racing 05-up Billet cup holders, shifter bezals, rear medallions, rear honeycomb panels, billet gas doors, sequential tail lights, climate control knobs and side window louvers
Fore Precision 03,04 Cobra and Modular parts like: Billet Cobra hood vents, side scoops and coil covers
Ford Racing lowering springs, exhaust, engine covers, Pre painted strut bars, GT coil covers and more
Redline Tuning hood lifters for Mustangs, Focus and most anything, plus there truck tail gate EZ Downs.
METCO Cobra, Shelby and Lightning S/C pulleys, idler pulleys, pulley tools, drive shaft loops, suspension parts and more.
Professional Products throttle bodies and upper plenums
S&B intakes for Diesels trucks

If you have any questions about any of these parts, please feel free to give us a call.



How about Crown Vic parts?

Fiesta parts?

Mini Cooper parts?

:D

Rob,
The tune greatlt improves throttle responce and will net about 20-30 RWHP depending on fuel used.
You will need to reflash the computer just like the GT500. Same deal.

Retail $555 in black and $570 in color.

Jay

Jay,

I will be ordering from you. Thanks alot. White it will be. Tana will be very happy. BTW, do I have to run super or can I continue with unleaded fuel.

Rob

Jay rocks ..... hes got great stuff ... a great vendor !!

a MUST ... is the JLT CAI with the matching fiber carbon radiator cover !!!

Now that grabber guy ... dont know alot about him .. but a name like grabber .. one has to be pretty suspicous:D

How about Crown Vic parts?

Fiesta parts?

Mini Cooper parts?

:D

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/funnypostsign.gif

We have crown vic parts coming soon

Rob, 87, 91 or 93

Is the Metco pulley system the one that has interchangeable pulleys via allen bolts?
If so, do they make a stock size pulley for it?

And would I need to send my SCT back for a new tune (I have your CAI)?

No chance I could trade the SCT in on the Livewire?

Thanks

Is the Metco pulley system the one that has interchangeable pulleys via allen bolts?
If so, do they make a stock size pulley for it?

And would I need to send my SCT back for a new tune (I have your CAI)?

No chance I could trade the SCT in on the Livewire?

Thanks


I have the Metco pulley from Jay and bought the stock sized pulley from him. 3.0

and once the metco is installed, the pulleys can be swapped easily?

and once the metco is installed, the pulleys can be swapped easily?


When swapping the S/C pulley, you put on a hub piece...

http://i208.photobucket.com/albums/bb76/FastestShelby/Other%20mods/DSC00848.jpg

The ring (pulley) is bolted on with 5 allen bolts.

The rings are different sizes 2.8, 2.6 and 3.0 which is stock size.

The common ring, which I have, is the 2.6 pulley (ring).

Yes, we have 3.0 pulley rings in stock.
If you got the package from us it will have a intake only tune on it.

Yes, we have 3.0 pulley rings in stock.
If you got the package from us it will have a intake only tune on it.

Can an intake w/ pulley tune be emailed and loaded on someones tuner, or does it have to be sent in?

Will our tuners connect to a computer in some way or is it just the new tuners that do that?

Rob, 87, 91 or 93

Jay, so what you are saying is that the tuner for the 4.6 will come with 3 tunes loaded in it. One for 87, and one for 91, and one for 93.

This car is stock except for the Corsas, which octane should I go with ?

We have 91 in our area, but not the 93.

Can an intake w/ pulley tune be emailed and loaded on someones tuner, or does it have to be sent in?

Will our tuners connect to a computer in some way or is it just the new tuners that do that?


It can be e-mailed.


Yes your tuner can hook up to a computer as long as you have the interface cable.:D

Jay, so what you are saying is that the tuner for the 4.6 will come with 3 tunes loaded in it. One for 87, and one for 91, and one for 93.

This car is stock except for the Corsas, which octane should I go with ?

We have 91 in our area, but not the 93.



I think he is saying you get one of the 3.

Just looking at all the options and I noticed that FRPP has a CAI for the 4.6 Mustang GT also. Kinda spendy at $829.

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=9880

Just looking at all the options and I noticed that FRPP has a CAI for the 4.6 Mustang GT also. Kinda spendy at $829.

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=9880

Moss has it for $799.
http://www.mossmustang.com/Shop/ViewProducts.aspx?PlateIndexID=65772

JLT=

Great looking product
Quality product
Great service
Great people w/ personal service
Backs up their product


FRPP=

Okay looking product
Okay quality product
service ?
people ?
Limited warranty


Maybe I'm a little biased?:D

JLT=

Great looking product
Quality product
Great service
Great people w/ personal service
Backs up their product


FRPP=

Okay looking product
Okay quality product
service ?
people ?
Limited warranty


Mabe I'm a little biased?:D

Agree 100%. Don't even think of the FRPP one Grabby. Don't you want Tana to have the same quality as yours?

Really.


That would be like not buying a birthday cake for her.


Sheesh.

Really.


That would be like not buying a birthday cake for her.


Sheesh.

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/iagree.gif


http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/rofll.gif

I didn't need back up on this one...;)

I didn't need back up on this one...;)

http://i237.photobucket.com/albums/ff171/largomarketing/birthday.jpg

Do we have an ignore button on this forum?:D

Do we have an ignore button on this forum?:D

http://i237.photobucket.com/albums/ff34/DreamRedux/rant.gif

Mr. Tucker,

As you can clearly see I have tried repeatedly to get your thread back on topic, but is seems as though this Joe G fellow wishes to continually side track the subject matter. I would suggest a 20% surcharge on any future orders from him in order to teach him a little respect for your very informative threads on this site.


Your #1 customer:D

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/Wasntme.gif

I was just bringing attention to all of JLT's great products and services by inviting others to join in this discussion.

I believe I shall be putting Beach boy on IGNORE from now on.http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/bricks.gif

http://i237.photobucket.com/albums/ff171/largomarketing/birthday.jpg

I was just looking at all options. I have looked at 6 so far. I trust the JLT stuff. It is fun to shop around to see what is out there and talk about it. That's what it is all about. :)

Do we have an ignore button on this forum?:D



Bill,

I sent you the ignore button;)

Bill,

I sent you the ignore button;)

Any chance of getting one of those sent my way?

http://i184.photobucket.com/albums/x162/BMF_Joker/emoticons/1b705a82.gif

Rob, the kit/tuner comes with all 3 tunes for you to pick.
You will gain the most on 93 or 91, but will still see a good gain on 87.

Much better throttle responce
Better and smoother pick up
Same or slightly better MPG
Color matched.
Cheaper, but better gains then ALL the rest!!

We have sold over 2000 05-up GT kits in the past 3 years. Search most any GT forum for tons of 3rd party results and comments.
The best recommendations are from the owners of the product. Please take that statement with you for every product you buy.
Mine and others.

Jay

Bill,

I sent you the ignore button;)


http://i208.photobucket.com/albums/bb76/FastestShelby/AA%20SMILIES/LaughHard.gif

Any chance of getting one of those sent my way?

http://i184.photobucket.com/albums/x162/BMF_Joker/emoticons/1b705a82.gif


You don't want this, trust me.:D

Better MPG?http://i208.photobucket.com/albums/bb76/FastestShelby/AA%20SMILIES/LaughHard.gif

You don't want this, trust me.:D

Did he give you one of these?

http://i184.photobucket.com/albums/x162/BMF_Joker/emoticons/why.gif

:D

Did he give you one of these?

http://i184.photobucket.com/albums/x162/BMF_Joker/emoticons/why.gif

:D



Nope,;) but i'll sent it to you bud

Nope,;) but i'll sent it to you bud

I knew it had to be something like that. Your a funny man Fred! :D

Nope,;) but i'll sent it to you bud

If it's "PG13" could you send it to me too?

Rob, the kit/tuner comes with all 3 tunes for you to pick.
You will gain the most on 93 or 91, but will still see a good gain on 87.

Much better throttle responce
Better and smoother pick up
Same or slightly better MPG
Color matched.
Cheaper, but better gains then ALL the rest!!

We have sold over 2000 05-up GT kits in the past 3 years. Search most any GT forum for tons of 3rd party results and comments.
The best recommendations are from the owners of the product. Please take that statement with you for every product you buy.
Mine and others.

Jay

Thanks Jay. I am sold on your stuff. I ordered the kit from Hun today, I mean Lisa.:) BTW, who developed the tunes I am getting with this kit ?

Thanks Jay. I am sold on your stuff. I ordered the kit from Hun today, I mean Lisa.:) BTW, who developed the tunes I am getting with this kit ?


Some guy who drives a ricer.http://i208.photobucket.com/albums/bb76/FastestShelby/AA%20SMILIES/LaughHard.gif



EVOLUTION PERFORMANCEhttp://i208.photobucket.com/albums/bb76/FastestShelby/AA%20SMILIES/ac15.gif



:)

Evo only does our GT500 tunes.
All other tunes are done by SCT directly.

We have done thousands of'em. You can expect 20-30 RWHP depending on the fuel/tune you use.
Rob, thanks for the order and both packages went out yesterday. You should have got a email with tracking info.

Evo only does our GT500 tunes.
All other tunes are done by SCT directly.

We have done thousands of'em. You can expect 20-30 RWHP depending on the fuel/tune you use.
Rob, thanks for the order and both packages went out yesterday. You should have got a email with tracking info.

I did get 2 e-mail shipping notifications for both my orders. I told Tana about her new CAI that I ordered for her GT/CS and she is excited to test it out once I get it installed.

Thanks

Rob

Evo only does our GT500 tunes.
All other tunes are done by SCT directly.

We have done thousands of'em. You can expect 20-30 RWHP depending on the fuel/tune you use.
Rob, thanks for the order and both packages went out yesterday. You should have got a email with tracking info.


So it is some guy that drives a ricer? :eek:

Snoop is pissed because he is Wrong again.

Doom Cough!

I've been wrong once before.:D

Snoop is pissed because he is Wrong as usual.

Doom Cough!

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/Paper_Bag_emoticon___updated.gif

Just installed the Silverhorse Racing window louvers!:bandit:

My new Stillen rotors were delivered today. I now have the Stillen rotors and the Porterfield pads. Just waiting for the new Asanti wheels and the Nitto tires due to be delivered next week.

Since I have the interior all torn apart, I'm going to install the dynamat to the floor and side panels before I put it all back together.

Also, finally installed the sequential tailights.

I think I need that 12 step program now.:ack:

Cal

Just installed the Silverhorse Racing window louvers!:bandit:

My new Stillen rotors were delivered today. I now have the Stillen rotors and the Porterfield pads. Just waiting for the new Asanti wheels and the Nitto tires due to be delivered next week.

Since I have the interior all torn apart, I'm going to install the dynamat to the floor and side panels before I put it all back together.

Also, finally installed the sequential tailights.

I think I need that 12 step program now.:ack:

Cal


That's one fine looking car indeed. I will be anxious to hear from you about the difference the dynamat makes.
What side scoops do you have ?

BTW I think it's way too late for the 12 step program for you ......LOL

That's one fine looking car indeed. I will be anxious to hear from you about the difference the dynamat makes.
What side scoops do you have ?

BTW I think it's way too late for the 12 step program for you ......LOL

LOL. I think your right. A lost cause.:silly: :lol:

The window louvers are from Silverhorse racing. You can order them from JLT though. I think I'm going to like them alot. Looks really cool and eliminates the blind spot I had with the 3D Carbons.:bandit:

Just installed the Silverhorse Racing window louvers!:bandit:

My new Stillen rotors were delivered today. I now have the Stillen rotors and the Porterfield pads. Just waiting for the new Asanti wheels and the Nitto tires due to be delivered next week.

Since I have the interior all torn apart, I'm going to install the dynamat to the floor and side panels before I put it all back together.

Also, finally installed the sequential tailights.

I think I need that 12 step program now.:ack:

Cal



Cal,
Your Shelby looks sweet.There aren't enough steps in any program for you now.Can't wait to see it.:bandit:

Cal, can you tell us about the lower side scoops, bolt on/stick on who makes em?

Cal,
Your Shelby looks sweet.There aren't enough steps in any program for you now.Can't wait to see it.:bandit:

Thanks Fred.

I installed the Silverhorseracing rear window louvers (JLT sells them) yesterday and today I installed the Dynamat before I reinstalled the rear seats and trim. Had some time left, so I installed the Dynamat in the trunk. I feel like someone beat the crap out of me.:fight: Got it all back together.

I backed it out of the garage and took a few pics.

Can't wait to get the new wheels, tires, rotors and porterfields installed. Then I'll be done with the exterior. Ya Right.:silly:

Thanks Fred.

I installed the Silverhorseracing rear window louvers (JLT sells them) yesterday and today I installed the Dynamat before I reinstalled the rear seats and trim. Had some time left, so I installed the Dynamat in the trunk. I feel like someone beat the crap out of me.:fight: Got it all back together.

I backed it out of the garage and took a few pics.

Can't wait to get the new wheels, tires, rotors and porterfields installed. Then I'll be done with the exterior. Ya Right.:silly:



Sweeeeeeet Cal.Nice job.:bandit:

Tucker, is that oil separator return (GT500 version) device still in design or was it dropped?

Looks great man!! Good job on the install.

The JLT oil separator is still in the testing stages. It's NEEDED!! Wow, does this car dump oil in the intake.

Sorry it's taking so long.

Jay

Cal, can you tell us about the lower side scoops, bolt on/stick on who makes em?

The lower side scoops are made by 3DCarbon (stick on). I like them because they don't stick out much. I bought them painted and the paint matches perfectly. I have the window scoops also but didn't realy like the look along with the blind spot. Once I saw the Silverhorse racing louvers, that was it, had to have them.:D

Cal