JLT Performance is launching some more Carbon Fiber pieces soon.

The stuff looks awesome, and I got my chance to try some out.

I picked up the radiator shroud cover and the fuse box cover today.

If you have the C/F intake, these pieces are a must have.


Installation of the parts is extremely easy, first start with removing the radiator cover...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02695.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02695.jpg)

Gently pry up the center pins, then remove the clips...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02696.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02696.jpg)



Install the new part and attach w/ the previously removed clips...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02702.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02702.jpg)


Pieces look awesome...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02700.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02700.jpg)


Fuse box cover is easily attached w/ two way tape. 3M of course, JLT doesn't compromise even in the small details.

Clean surface w/ supplied alcohol wipe...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02703.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02703.jpg)


Remove backing on tape...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02705.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02705.jpg)

Position gently in desired location, then press lightly to adhere the tape.

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02706.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02706.jpg)


Very easy to put on and compliments the C/F intake piece.

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02708.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02708.jpg)


Note, no more ugly prop rod junk!!

Available here...

http://jlttruecoldair.com/gt500.htm

I too love this part...A real good fit !!!!

Thanks for the good pic's Mr. Poopdog. I ordered mine on 1/16/08. I hope to get them soon.

Poopdog died over here. Hahaha....

JLT Performance is launching some more Carbon Fiber pieces soon.

The stuff looks awesome, and I got my chance to try some out.

I picked up the radiator shroud cover and the fuse box cover today.

If you have the C/F intake, these pieces are a must have.


Installation of the parts is extremely easy, first start with removing the radiator cover...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02695.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02695.jpg)

Gently pry up the center pins, then remove the clips...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02696.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02696.jpg)



Install the new part and attach w/ the previously removed clips...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02702.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02702.jpg)


Pieces look awesome...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02700.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02700.jpg)


Fuse box cover is easily attached w/ two way tape. 3M of course, JLT doesn't compromise even in the small details.

Clean surface w/ supplied alcohol wipe...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02703.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02703.jpg)


Remove backing on tape...

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02705.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02705.jpg)

Position gently in desired location, then press lightly to adhere the tape.

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02706.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02706.jpg)


Very easy to put on and compliments the C/F intake piece.

http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/th_DSC02708.jpg (http://i208.photobucket.com/albums/bb76/FastestShelby/Carbon%20Fiber/DSC02708.jpg)


Note, no more ugly prop rod junk!!

Available here...

http://jlttruecoldair.com/gt500.htm




Sweeeeeeeeet

I ordered last week also.

I ordered a the blue radiator cover along with a blue tube for the cai and a blue air filter.

It should look good with the blue stripes painted under the hood.:cool:

Cal

I ordered last week also.

I ordered a the blue radiator cover along with a blue tube for the cai and a blue air filter.

It should look good with the blue stripes painted under the hood.:cool:

Cal

That sounds cool, I'll have to stop by and look at it before Jay sends it off. I've seen the blue CAI, but he didn't have the other parts in blue when I was there.

That sounds cool, I'll have to stop by and look at it before Jay sends it off. I've seen the blue CAI, but he didn't have the other parts in blue when I was there.

He told me it would probably be a couple weeks. No problem, the car is in hybernation.:(

It's actually snowing here tonight, so no riding for a few days at least.:(

It's actually snowing here tonight, so no riding for a few days at least.:(

Snowing? What happened to spring? Let me guess 10 snowflakes? http://i39.photobucket.com/albums/e181/fefelants/SMILZ/Q%20-%20R/rofl.gif

Snowing? What happened to spring? Let me guess 10 snowflakes? http://i39.photobucket.com/albums/e181/fefelants/SMILZ/Q%20-%20R/rofl.gif

We have a MAJOR blizzard coming in, we are expecting almost 1/2", I may not be able to get to work Monday!:D

We have a MAJOR blizzard coming in, we are expecting almost 1/2", I may not be able to get to work Monday!:D

http://i165.photobucket.com/albums/u47/tsarra/Smileys/3D_emoticon_195.gif

I also ordered a set . Standard black . They will give the engine compartment a nice but not too flashy look .IMO

Only thing I'm trying to decide is whether to get the std black CF or the red CF.

I already have the red CF CAI, so the other 2 pieces would fit right it, but I'm not sure if it's TOO MUCH red under the hood.

Here are some pics Jay posted of the red pieces on a black car like mine.

http://i218.photobucket.com/albums/cc289/JoeG_09/th_JLTredfront3.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/JLTredfront3.jpg)
http://i218.photobucket.com/albums/cc289/JoeG_09/th_JLTredfront2.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/JLTredfront2.jpg)
http://i218.photobucket.com/albums/cc289/JoeG_09/th_JLTredfront.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/JLTredfront.jpg)

Joe,
I am watching a movie with Peaches and I just showed her your dilema on which color to pick. For what it's worth, we both think you should get the red because the CAI is red. Tana said it would add a nice splash of color to the engine compartment. She said it would give it some "wow factor".

I ordered black because my CAI is black.

Joe,
I am watching a movie with Peaches and I just showed her your dilema on which color to pick. For what it's worth, we both think you should get the red because the CAI is red. Tana said it would add a nice splash of color to the engine compartment. She said it would give it some "wow factor".


Peaches thinks like Deb.

Deb said the same thing... plus, I think it will look good with my two-tone interior.

Thanks for the advice!

http://i218.photobucket.com/albums/cc289/JoeG_09/th_interior.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/interior.jpg)
http://i218.photobucket.com/albums/cc289/JoeG_09/th_Interior-seats.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/Interior-seats.jpg)

Only thing I'm trying to decide is whether to get the std black CF or the red CF.

I already have the red CF CAI, so the other 2 pieces would fit right it, but I'm not sure if it's TOO MUCH red under the hood.

Here are some pics Jay posted of the red pieces on a black car like mine.

http://i218.photobucket.com/albums/cc289/JoeG_09/th_JLTredfront3.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/JLTredfront3.jpg)
http://i218.photobucket.com/albums/cc289/JoeG_09/th_JLTredfront2.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/JLTredfront2.jpg)
http://i218.photobucket.com/albums/cc289/JoeG_09/th_JLTredfront.jpg (http://i218.photobucket.com/albums/cc289/JoeG_09/JLTredfront.jpg)

If I had a Black or Alloy car, I think the Red would be great.

I'm with George, I don't care for the flashy polished stuff.

how many inches we got there? i'm off in no mans land, and shelby is tucked away, since Nov...arrrrrrrrg

how many inches we got there? i'm off in no mans land, and shelby is tucked away, since Nov...arrrrrrrrg

I'm in Virginia Beach and we got a good covering last night, not sure how much in inches, but it is almost all burned off now though it is still very cold.

What part of Virginia are you from and when will you be back?

I'm in Virginia Beach and we got a good covering last night, not sure how much in inches, but it is almost all burned off now though it is still very cold.

What part of Virginia are you from and when will you be back?

Same town as you Bill. Be back in Apr. Got many parts in the garage waiting for my return and wrench work. Welcome to the site. I'm lucky i even have a connection now. It's hit and miss.
Keith

Same town as you Bill. Be back in Apr. Got many parts in the garage waiting for my return and wrench work. Welcome to the site. I'm lucky i even have a connection now. It's hit and miss.
Keith

I had a quick talk w/ a white/blue stripe Shelby at a stop light 6 months ago. He said he had a different S/C on his car already, was that you??

Hey, I know all you guys...

Hey, I know all you guys...


Who are you?? :D

Who are you?? :D

I think he's the guy who's going to give me some free CF parts.

:D

I think he's the guy who's going to give me some free CF parts.

:D


Free?? I had to pay $20. Sheesh.:cool:

Have any of you seen one of the carbon fiber hoods in person? It might be a nice look if you went all out with a carbon fiber look. I have seen facia splitter,mirror covers,rocker panels, and hood, know of any others?

JR

I have not seen the hood.

I like my hood, I haven't seen a better one yet and they are awfully expensive after purchase and paint.

There was as late as yesterday a carbon fiber hood on ebaymotors under GT500. It is an exact copy of the stock hood, and I suppose it it intended to be installed unpainted. They had it installed on a Vapor coupe like mine with the stripes deleted. The 3d look is interesting looking.

here is a link

http://cgi.ebay.com/ebaymotors/New-IPP-2007-2008-Mustang-GT500-Carbon-Fiber-Hood_W0QQitemZ120212179941QQcmdZViewItem?hash=item 120212179941#ebayphotohosting

Are these itmes available and in stock now?

Are these itmes available and in stock now?

Available yes.

Jay (JLT) has said they're selling very well, so you may have to wait a week for the next shipment to come in depending on what's in stock and what you order (colored ones are a week or 2 out right now last I heard).

Are you working for Jay also?:D

Are you working for Jay also?:D

Jay who?...:confused:

Jay who?...:confused:

Sorry. Jay is the owner of JLT Performance who makes the C/F pieces.

http://jlttruecoldair.com/gt500.htm

I like alot, and birthday is just around the corner.

I like alot, and birthday is just around the corner.

...so send me your address already. Haha...:D

As of right now we are still on back order and about 2-3 weeks for orders placed today.
I can tell you that we are in the works to not have back orders for CF parts in the future and make many more CF parts for our cars and others.

If your interested, get on the list. We don't charge you until it ships.
More parts will be in tomorrow and shipping Wed. for the back orders on the list.

Thanks
Jay

As of right now we are still on back order and about 2-3 weeks for orders placed today.
I can tell you that we are in the works to not have back orders for CF parts in the future and make many more CF parts for our cars and others.

If your interested, get on the list. We don't charge you until it ships.
More parts will be in tomorrow and shipping Wed. for the back orders on the list.

Thanks
Jay

Got the final ok from the boss.

Entering it tonight... you'll see the order when you get to the office tomorrow morning Jay.

Are you working for Jay also?:D

I just want the employee discount! http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/happy.gif

I just want the employee discount! http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/happy.gif

You mean you did not get it ?

Lisa fixed me up with a good deal.

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/dance014.gif

You mean you did not get it ?

Lisa fixed me up with a good deal.

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/dance014.gif

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/Cry.gif

Thanks for the awesome deal Lisa.

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/cooldudes.gif

Thanks for the awesome deal Lisa.

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/cooldudes.gif

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/biteme.gif

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/biteme.gif

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/posticon_rant.gif

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/rant-2.gif

I was thinking of buying those for mine means I have the mod bug and no car.

They look pretty sweet.

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/posticon_rant.gif

http://i186.photobucket.com/albums/x53/Grabrrr/Animated%20stuff/rant-2.gif

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/BiteMe3.gif


:D

http://i210.photobucket.com/albums/bb220/zisisp/Laughing.gif

http://i210.photobucket.com/albums/bb220/zisisp/Laughing.gif

http://i218.photobucket.com/albums/cc289/JoeG_09/Emoticon/girljiggle.gif