Ford Shelby GT500 Forum banner
Status
Not open for further replies.

07 with TVS & Pro-Cal Tune + L&M 66mm = ?

2K views 3 replies 4 participants last post by  nodice 
#1 ·
Hi...

I got an 07 GT500 basically stock but with the TVS kit with the Ford Pro-Cal tune that comes with it. I just got the L&M 66mm with the matching plenum/elbow. If I bolt this on right now....what results would I get with no change in the tune? What HP and TQ would I increase by? Is it safe for the car? :worried:

.......................................

I also have in the garage ready to go in shortly.....a Shelby dual puller H/E, VMP's new 2.59 pulley with 90mm idler, Reische 170 stat.....qbviously with this it will be custom dyno tuned with my SCT. I'm hoping to get 650RWHP with all this....will I? :rofl:

OSHELBYO
 
#2 · (Edited)
You'll need to retune the car with the added parts!!! you'll also need the lower pulley to come close to your 650 goal and a new fuel pump or boost a pump!!
 
#3 ·
The L&M TB and plenum works great with the Ford Procal tune. Only time I've seen issues is when the current tune messes with the Ford stock TB calibrations.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top